Learn how to sew on badges by hand or by machine

When you’d like to brighten up a garment, accessory, luggage piece or even hats you could sew on badges to get the new look easily. Badges or patches when placed strategically can immediately replace the look of a garment or accessory and take it from boring to spunky within just a few minutes. In case you have children and they keep earning badges of merit you wish to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy when you know the way to do it.

To do this process of sewing on a badge, start with placing the badge in the place that you want it to be. Now secure the badge well with some pins to ensure that it stays in place and doesn’t shift when you’re sewing it on. So if you are putting the patch on a garment, you need to fix the patch and after that try the garment on to be certain that the patch or the badge looks right in the place. If your patch requires a little readjustment you can do it at this time easily.

Now thread the needle making sure that the thread that you are currently using isn’t too long. Keep your thread on a length of approximately 18inches for simple maneuvering. If your thread is too long then you might get bothered by knots. Once you’ve the thread ready create a knot at the end of the thread. You could thread a needle by hand by holding the non knotted end in between your forefinger and thumb and then passing it through the eye of your needle. You may as well take the assistance of a needle threader if you find threading a needle in this way difficult.

Pass the needle in the badge and the fabric being sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from which you started stitching keeping this distance from your last stitch constantly. Continue stitching surrounding the entire perimeter of the badge till you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread through a single stitch. Pull the thread firmly to secure the knot after which cut off any excess thread that’s left. Lastly remove extra safety pins that you were using to secure the patch in position.

You can also sew on badges with the aid of a sewing machine in case you don’t want to do the same by hand. Decide on a thread that matched the color of the patch and then tread your machine. It’s also possible to pick out a contrasting color with regards to the look which you want to give your badge. Once this is successfully done you should start sewing you badge. Utilize the top of the badge for your starting point and sew all across the edge of your badge utilizing the regular stitch mode ending in your starting position. Once done, cut any additional thread that connects the badge to the machine and your garment is ready for usage together with the badge.